When professional audio equipment is used, problems like this and that will inevitably occur. Is there no way to avoid these problems? Of course not. As long as we use these correctly and reasonably, we can avoid them. Let's discuss some reasons for the burning of the sound system caused by improper use.

The second reason why professional audio equipment is burnt out is that the frequency divider in our audio equipment is improperly used. In general, the improper use of the crossover point at the input end or the unreasonable working frequency range of the loudspeaker is also a cause of damage to the tweeter. From this point, we can see that in order to protect our audio system, we must select the correct frequency division point strictly according to the operating frequency range of the loudspeaker provided by the manufacturer when we purchased it.

Three Reasons for Burnout of Audio Equipment

The third cause of professional audio burnout is that our equalizer is improperly debugged. The adjustment of equalizer is very important, and it should be adjusted with actual spectrum analyzer or other instruments. Only in this way can we reduce the burning of our equipment to a certain extent.

The last point is that we have problems with the volume adjustment of the device. Maybe we didn't pay much attention to the use of this equipment. The unreasonable adjustment of the volume once or twice may have an impact on our equipment that we didn't realize, but if we operated improperly for a long time, our professional audio equipment would burn out sooner or later.