The positioning method of professional audio has always been a concern of many audio enthusiasts. How to position the KTV professional audio? Next, we will introduce the relevant information in this regard.

1. 317 proportional method

This positioning method refers to dividing the length of the KTV compartment into three equal parts, placing the speakers at one third of the length, and the spacing between the two speakers is 0.7 times of two thirds of the length of the room. One thing you should also pay attention to here is that the horn should have a slight inward projection angle, but it can also be used without inward projection. The listening position should not be close to the back wall.

2. Sany proportional method

This method is to divide the length of the room into three equal parts and the width into three equal parts. The horn is placed at the intersection of the first equal part of the length and width. The horn can have a slight inward projection angle, even without inward projection. The listening position cannot be close to the back wall. This placement method of KTV professional audio seems to be somewhat the same as the first one introduced to you. But they have certain differences.

3. Screw hole pendulum method

The placement method of this kind of sound is to place the speakers between one third and one half of the length of the room, and then place the two speakers as close to the side walls as possible (if the room is very wide, it is not necessary to close to the side walls). The inward projection angle of the two speakers should be greater than 45 degrees. The listening position should be about 0.5m - 1m after the intersection of the projection angle cross lines.