1. Noise from conference room sound system

Noise problems are often caused by improper use of pro audio and microphones. To resolve this issue, follow the methods below. First, set up a simple layout for a sound enhancement site in a video conference. The acoustics of the meeting room should be as high as possible and not too close to the walls. However, feedback is valuable because not only does it affect the meeting, but it can easily damage the equipment used in the meeting. Then don't place the microphone within range of the speaker, especially not near the speaker. Then, before the video conference, you need to pay attention to the adjustment of the audio equipment in the conference room, especially the adjustment of the regulator, to minimize possible feedback, and at the same time learn to use equalization and parametric equalization to find feedback points for the mixer, and slightly attenuate to eliminate the conference room. Feedback from audio equipment. conference room audio

2. Incoherent video images

Problems with choppy video images are usually caused by insufficient network bandwidth. When encountering this problem, first check whether the bandwidth meets the conditions and cancel the bandwidth limit. Users also need to check the network for problems such as network delay, packet loss, etc., which can also cause image inconsistencies. In addition to network factors, the settings of the system itself can also cause this phenomenon. Users can fix this by adjusting the image size (use a smaller resolution), code flow and frame count.

3. Voice communication suddenly fails

For this problem, the user first needs to check whether the waveform exists in the sound toolbar at the bottom left, and then check the mixer, professional functions and professional sound to ensure that the connection is normal. After eliminating external factors, check whether the system has a firewall and whether the ports of the firewall are open. Also check that the sound card drivers are working and that the master volume and other options are muted. Conference room audio equipment

4. No video conferences

If this happens, you can see if the other participant's image is playing over the video in the main mode. At the same time, check whether the other party's network has a firewall, and ensure that the firewall port is open. In addition, the instability of the network itself can also cause these problems. The above is the solution of the conference room audio equipment solution, I hope to help you.