.The key is that the position of the KTV audio equipment in the room will affect the balance of sound, low frequency quality, deep width of the audio field, the clarity of the intermediate frequency, and the image image. force. If you want to get a good voice, if you can master the following tricks, if you are correct, you will feel like you have a whole audio system.

Increase the sense of low -frequency quantity and body sense

Make KTV audio equipment closer to the rear wall and side wall. Compared with unilateral walls, the corners can double the low frequency. If the TOE-in speaker is needed, there is no TOE-in, or only a little TOE-in, the positioning sense will be inaccurate, and the low frequency is round and soft.

Strengthen low -frequency rhythm and body sense

Let the horn away from the wall. Increase the TOE-in angle of the horn. If the sound field is too narrow, the distance between the two speakers can be opened a little. If the sound field is too bulky, there is a low frequency echo, and no matter how you move the horn, it may be that the position of the "emperor" may not be good. Please change the location of the listening.

Make the sound field wider

Open the distance between the two speakers. If you can't pull it away, you can change the angle of TOE-in a little bit.

Reduce the sound field and strengthen the sense of positioning

Contrary to the previous one, the distance between the horn is reduced and the TOE-in angle is increased. Reduce the adverse effects of space on the sound (if you encounter too much reflection wall), when the reflex sound is too much, the sound will be sharp and even echo. Pulling the distance between the horn is closer to the side wall than the back wall. Regenerate the low-frequency background from the side wall, increase the TOE-in angle, and listen to more direct sound instead of reflex sound.