1. The noise of the conference room sound

Noise problems are often caused by improper use of professional speakers and microphones. To resolve this issue, follow the methods below. First, set up the layout of a simple sound enhancement site in a video conference. The acoustics of the meeting room should be as high as possible and not too close to the walls. However, feedback is valuable because it doesn't just affect the meeting; it can easily damage the equipment used in the meeting. Then don't place the microphone within range of the speaker, especially not near the speaker. Finally, before the video conference, you need to pay attention to the adjustment of the audio equipment in the conference room, especially the adjustment of the adjuster, minimize possible feedback, and learn to use the equalizer and parametric equalizer. The mixer finds the feedback point and attenuates it slightly to remove the feedback from the conference room audio equipment.

2. Video image incoherence problem

Problems with choppy video images are usually caused by insufficient network bandwidth. When encountering this problem, first check whether the bandwidth meets the conditions and whether the bandwidth limit is eliminated. Users also need to check the network for issues like network latency and packet loss, which can also cause inconsistent images. In addition to network factors, the settings of the system itself can also cause this phenomenon. Users can fix this by adjusting the image size (use a smaller resolution), code flow and frame count.

3. Voice communication suddenly fails

For this problem, the user first needs to check whether there is a waveform in the sound toolbar at the bottom left, and then check the mixer, professional functions and professional sound effects to ensure that the connection is correct. After eliminating external factors, check whether the system has a firewall and whether the ports of the firewall are open. Also check that the sound card drivers are working and that the master volume and other options are not muted.

4. Inability to persist video conferencing issues

If this problem occurs, you can see if other attendees' images are playing over video in main mode. At the same time, check whether there is a firewall on the other party's network, and ensure that the firewall port is open. In addition, the instability of the network itself can also cause these problems. The above is the solution to the conference room audio equipment, I hope to help everyone.