Equipment connection points: In the specific connection of professional audio equipment, many audio engineers do not know how to start with various and complicated equipment sockets. It's really simple. Remember the following points:

1. Balance method: At present, the sockets on the rear panel of audio equipment are mostly balanced ports. We only chose whether to use the balanced cable of the connector to connect the device or the balanced cable of the TRS 6 and 35cm stereo connectors to connect the device.

2. Unbalanced side: Although most of the sockets on the rear panel of audio equipment are balanced ports, some devices still have unbalanced ports. For example, some electronic crossovers have output ports labeled Balanced OUT and Unbalanced OUT. Therefore, we can also use the TS6's unbalanced cable and 35cm mono connector to connect the device. As long as the line is not too long and the interference is not too large, it can still be connected.

speaker equipment company

3. IN input and OUT output: Some beginners get dizzy seeing so many sockets behind the device. In fact, there is a flaw: no matter what audio equipment it is, it can basically be divided into two parts: "IN Input" and "OUT Output". So we only need to look for "IN and OUT", and other unfamiliar outlets should not be connected at will. In short, connected devices are like running water: water upstream flows into the "IN input"; water downstream flows out again through the "OUT output". Isn't that straightforward?

The connection method of professional audio equipment has been summarized in detail for everyone. From the time of connection, you may face various and countless equipment sockets. Be careful when connecting, do not connect in series, it is easy to generate noise , a serious fire. speaker conference equipment