1. The noise of the conference room sound system

Noise issues are usually caused by improper use of professional audio and microphones. To solve this problem, please follow the following methods. Firstly, set up a simple sound enhancement site layout in the video conference. The sound effect of the conference room should be as high as possible and not too close to the wall. However, feedback is valuable because it not only affects the meeting; It can easily damage the equipment used in meetings. Then do not place the microphone within the range of the speaker, especially do not approach the speaker. Finally, before a video conference, it is necessary to pay attention to the adjustment of the audio equipment in the conference room, especially the adjustment of the adjuster, to minimize possible feedback and learn to use the equalizer and parameter equalizer. The mixer finds the feedback point and attenuates it slightly to eliminate feedback from the conference room audio equipment.

2. Incoherent video images

The problem of inconsistent video images is usually caused by insufficient network bandwidth. When encountering this problem, the first step is to check whether the bandwidth meets the conditions and whether bandwidth restrictions have been eliminated. Users also need to check whether the network has issues such as network latency and packet loss, which can also lead to inconsistent images. In addition to network factors, the system's own settings can also cause this phenomenon. Users can solve this problem by adjusting the image size (using smaller resolutions), code flow, and frame count.

Typically, in advanced audio configurations, the investment in audio cables ranges from 15% to 30%, which is reasonable. Even for ordinary audio, it is not advisable to choose low-end AV cables because this not only causes signal attenuation, but also makes the transmission signal susceptible to external electromagnetic interference, ultimately leading to sound distortion. Professional audio stage equipment

3. Sudden failure of voice communication

For this issue, users first need to check the sound toolbar at the bottom left for any waveforms, and then check the mixer, professional features, and professional sound effects to ensure proper connection. After excluding external factors, check if the system has a firewall and if the ports on the firewall are open. Also check if the sound card driver is working properly and if the main volume and other options are not muted.